Do you find that your main drain keeps clogging? Don’t panic—it’s an issue that can be resolved with a few DIY tips. From chemical solutions to natural methods, there are a variety of techniques you can try to unclog your main drain. Keep reading to learn more about DIY tips for unclogging a main drain.

Use a plunger

Using a plunger to unclog your main drain is a fairly straightforward task, but there are a few things you need to know before you get started. First of all, you’ll need to make sure that you have the right type of plunger. The most common type is the “cup” plunger, and this is the type that you’ll want to use for a main drain. This type of plunger has a larger cup and a shorter handle. Next, check your drain to make sure there are no sharp objects or anything else that could get caught. Once you’ve ensured that the area is safe, you’ll want to start by running some hot water down the drain. This will help to loosen up any debris that may be clogging the drain. Next, take your plunger and place it firmly over the drain opening. Make sure that it’s sealed tightly, and then begin to pump it up and down. You’ll want to do this several times, and you may even need to add some more hot water as you go.

Use a chemical cleaner

If your main drain is clogged with organic matter, a chemical cleaner may be the best solution. However, you should use caution when using chemical cleaners as they can be caustic and potentially dangerous if used incorrectly. Always read and follow the directions on the label and wear rubber gloves and safety goggles to protect yourself from the fumes and any potential splashes. When using a chemical cleaner, it’s important to remember that it can take several hours for it to work. In addition, it may not work at all if the clog is too severe. If you’re not sure what kind of clog you have, it’s best to call a professional plumber to inspect and assess the situation.

Use a drain snake

img

A drain snake is a long, flexible metal cable that is inserted into your drain pipe. It has a curved tip at the end that helps it maneuver around bends and blockages in the pipe. The snake is then turned in a clockwise direction to cut through the clog. The length of the snake is adjustable, so it can be used to reach even the most difficult clogs. Using a drain snake is a fairly easy process, but it does require some caution. Before you begin, make sure to wear protective gloves and safety glasses. Also, be sure to read the directions that come with the snake before you use it. Once you’re ready to begin, insert the snake into the drain until you feel resistance. You may need to turn the snake several times before the clog is broken up. When the clog is cleared, you can then pull the snake out of the drain.

Use an auger

When it comes to unclogging a main drain, an auger is the best choice for the job. The most effective way to use an auger is to start at the top of the drain and slowly feed the auger down the pipe. As you feed the auger down the pipe, it will start to bore through the blockage, breaking it up and clearing out the pipe. When using an auger, it’s important to ensure that you’re using the right size. If the auger is too small, it won’t be able to bore through the blockage, and if it’s too big, it could cause damage to the pipes. As a rule of thumb, you should use an auger that is slightly smaller than the diameter of the pipe.

Overall, DIY tips for unclogging a main drain are an important way to save time and money. With the right tools and knowledge, these DIY tips can help homeowners quickly and safely resolve the problem without having to call a professional. However, if the above tips don’t work, it might be time to call a professional plumber to get the job done.

By Manali